top of page


Most companies make their CE-marking at the end of the project, which is often a problem since all the projects resources are already allocated elsewhere. Therefore, the CE-marking often ends up being a heavy peak load for individual employees or even worse, not being made. Adding recommends our customers to collect the necessary documentation for the technical dossier during the project, this way the CE-marking will be made correct and does not end up as a burden.

A CE-marking shows that a product complies with applicable safety requirements from relevant directives and harmonized standards. To this, a risk assessment of the finished product must be carried out in order to locate and minimize possible remaining risks. The marking acts as the company’s defense in the event of an accident with the product and it is a requirement if the product is to be marketed within EU.

Every product has different safety requirements and may be subject to several directives.  A small sample of directives are listed beneath:

  • Machinery directive

  • Low voltage directive

  • ATEX directive

  • Pressure equipment directive (PED)


Adding guides you through the process

At Adding we adapt to your needs, where we can act as a sparring partner from project start or just perform the risk assessment of the final product according to DS/EN ISO 12100. Our experience using the relevant directives and harmonized standards, makes the process more effective and rewarding for our customers.

Adding is the extra hand

Addings years of experience with CE-marking of large power plant benefit our customers, when we CE-mark your product. We make sure that you have the correct and proper amount of documentation, that proves the product complies with legal requirements.

Solvarmebaseret fjernvarmeprojekt i Tyskland.

En tysk by har i Danmark købt et komplet solvarmebaseret fjernvarmeanlæg incl. paneler, teknikbygning, varme-akkumuleringstank, net-tilslutning etc.


Vores kunde og slutbrugeren ønsker en tysktalende projektleder, der har mange års erfaring med tilsvarende anlæg, og vi har erfaringen fra tilsvarende anlæg med varmelager i fx Tibet.

Adding Engineering forestår projektledelsen.

Forgasning af LPG.

Vores kunde ønsker pga. krav om øget forsyningssikkerhed en 3. forsyningskilde ud over de nuværende  forsyninger med metan fra gasnettet og med LNG fra eget tanklager. Derfor etableres en LPG-installation med tanke, forgasningsunits, SNG mixing-unit (for at holde wobbe-index som metan) samt trykholdestation.

Adding Engineering forestår projektledelse og detailkonstruktion.


FPSO med Combined Cycle.

Vi er startet på endnu et norsk FPSO-projekt, Agogo, med Combined Cycle power-modul. Gasturbinerne afleverer røggas-varmen til Waste Heat Recovery - kedler, i stedet for at sende den ud til fuglene. Kedlerne leverer damp til dampturbiner, der driver generatorer. Hermed reduceres antallet af gasturbiner ombord. Dejligt at denne stærkt CO2-reducerende teknologi nu slår igennem offshore.

Adding Engineering definerer styrings-strategier og sikkerhedssystemerne.


Adding Engineering arbejder på mange andre projekter, og har muligheden for at bidrage med mange flere kompetencer til din virksomhed end de her nævnte.

Så grib gerne fat i os, så snart behovet opstår.


Thanks for your message!

bottom of page