CE MARKING
Most companies make their CE-marking at the end of the project, which is often a problem since all the projects resources are already allocated elsewhere. Therefore, the CE-marking often ends up being a heavy peak load for individual employees or even worse, not being made. Adding recommends our customers to collect the necessary documentation for the technical dossier during the project, this way the CE-marking will be made correct and does not end up as a burden.
A CE-marking shows that a product complies with applicable safety requirements from relevant directives and harmonized standards. To this, a risk assessment of the finished product must be carried out in order to locate and minimize possible remaining risks. The marking acts as the company’s defense in the event of an accident with the product and it is a requirement if the product is to be marketed within EU.
Every product has different safety requirements and may be subject to several directives. A small sample of directives are listed beneath:
-
Machinery directive
-
Low voltage directive
-
ATEX directive
-
Pressure equipment directive (PED)
Adding guides you through the process
At Adding we adapt to your needs, where we can act as a sparring partner from project start or just perform the risk assessment of the final product according to DS/EN ISO 12100. Our experience using the relevant directives and harmonized standards, makes the process more effective and rewarding for our customers.
Adding is the extra hand
Addings years of experience with CE-marking of large power plant benefit our customers, when we CE-mark your product. We make sure that you have the correct and proper amount of documentation, that proves the product complies with legal requirements.
Lead Procesingeniør & Teknisk Lead på El- & Automation hos Waste to Energy (WtE) anlægsproducent
Adding Engineerings kunde er en af de ledende WtE selskaber på verdensplan, og beskæftiger sig med udvikling, design, engineering, konstruktion og idriftsætning af energiproducerende anlæg baseret på et bredt spektrum af faste brændsler, primært affald og biomasse.
Firmaet har patent på Dynagrate®-forbrændingsristen, som i branchen for WtE er kendt for at have en rigtig særlig god ydelse og lave vedligeholdelsesomkostninger.
Adding Engineerings medarbejdere har været tilknyttet virksomheden i en årrække. Vi fik opgaven som Lead Engineer på de procesrelaterede opgaver, såsom verifikation af procesdata samt direkte kontakt til underleverandører. HAZOP, CE-mærkning og SIL-beregningerne afvikledes i tæt samarbejde med underleverandører og kundens tekniske afdelinger.
Dertil har vi været tilknyttet som Teknisk Lead på el- og automation for et projekt i England. I det specifikke engelske projekt, var der krav om el-diagrammer tegnet i Excel. Ved grundigt kendskab til makroprogrammering kunne disse tegnes på relativ kort tid, baseret på lister over instrumenterne udtrukket fra en database. Der skulle blot tilknyttes et ”signal typical” med forsyning og signalklemmer, og hvilken junction box instrumentet skulle forbindes til. Grundigt kendskab til Office pakken, krydret med kendskab til Python-programmering, har gjort det muligt at kontrollere samhørighed mellem P&I-diagrammer, el-diagrammer, funktionsbeskrivelser og I/O-lister på en særdeles sikker og omkostningseffektiv måde.
Sideløbende har vi bidraget med tekniske indkøb. Fra starten oprettedes tekniske specifikationer for de indkøb, der skal foretages, som frekvensomformere, hydraulik og instrumentering for måling af tryk, flow og temperatur etc. Adding Engineering forestod design af komponenter i samarbejde med leverandører og kundens 3D designer, el-ingeniører og konstruktionsansvarlige.
Desuden blev P&I-diagrammer og el-diagrammer gennemgået og kontrolleret.
Adding Engineering bidrog også med ingeniørkompetencer inden for opbygning af O&M manual med de proces- og anlægsrelaterede dokumenter, og sikrede at dokumentation blev tilpasset den enkelte kundespecifikke ordre.
Optimize your company's project management with Adding Engineering's MS Project experts
At Adding Engineering, we have extensive experience in using MS Project as a management tool on numerous projects.
Project management is the backbone of any company's success, but all too often even experienced project managers and engineers face challenges in using MS Project effectively. The preparation of project plans can easily become complex, unmanageable and difficult to update, resulting in a lost overview of the projects' direction and status.
At Adding Engineering, we understand the importance of not only having a solid project plan, but also ensuring that it is user-friendly and functional in practice. We offer a combination of specialized training and advice tailored to your specific needs. We help implement concrete plans in your company, regardless of whether it concerns development projects or major shutdown projects in connection with maintenance or revision of process plants.
Our expertise extends from individual projects to large complex EPC projects, where we create coherent and manageable sub-plans. We also understand the importance of transparency and live updates. Therefore, we can help your company move project planning up into a Project Online solution. This not only allows for live access to the plans for a wider part of the company, but also creates a much more stable and secure operating environment.
Do you want to take your company's project planning to the next level? Contact Adding Engineering to explore how our specialized approach to MS Project can help you and your staff create usable, valid and professional plans that strengthen your project management practices.
We look forward to helping your company realize its full potential in project management.
Why thorough planning is vital to the success of any project:
-
It improves project execution and increases its success rate
-
It saves money
-
It improves team communication
-
This ensures the best utilization of resources
-
It reduces risks
-
It makes it easy to track project goals and results
_JPG.jpg)